|
 BIP
Amino Moulding Powders are based on colourless thermosetting
resins, which are condensation products of either urea
or melamine with formaldehyde. These resins are combined
with cellulose fillers, pigments, catalyst and other
additives to give the range of powders described below.
This will enable customers to select the appropriate
grade of powder for their particular application since
the properties of the various grades are described
together with examples of typical applications.
|
Advice on mould design and moulding procedures together
with trouble-shooting guides is given to enable the
optimum performance to be obtained from these materials.
The full resources of BIP’s Technical Sales and
Service Department are available should any further
assistance be required.
Before using any of the materials, the guide to handling
of BIP Amino Moulding Powders should be consulted.
|
